Webercol Plus White – 20kg
High-performance C2TE tile adhesive for low-porosity tiles and wet areas.
Dispatch within 24 Hours
Warranty Protection
Description
Webercol plus is a ready mix cement-based high performance polymer “latex” modified tile adhesive for inter-nal and external use. webercol plus has a strong bonding effect, used for adhering large tiles, or in cases of permanent exposure to high degrees of humidity. It can be used in a damp environment, and is water resistant.
webercol plus is classified as C2TE according to EN12004. webercol plus is non-sagging and slip resistance «T» with ability to perform in extended open time conditions «E». Webercol plus can be «S1» deformable when mixed with weberad 225 MB. (see instruction for use).
SCOPE OF USE
webercol plus is used for fixing a wide range of tiles (ceramic, sandstone, granite, marble, porcelain, etc.) on the following
substrates:
• Concrete
• Lightweight blocks
• Stone walls (cleaned and prepared)
• Existing tiles (internal use after preparation)
• Cementitious plaster and renders
• Gypsum Board (firmly fixed & dust free)
• Fixing of Polystyrene board to concrete or cementitious substrate. Over difficult substrates such as cement board, gypsum, wood… Primer is required; webercol prime, consult company for advice. webercol plus can be used for tiling in:
• Private swimming-pools (≤ 80m3).
• Bathrooms
• Stairs
• Facades
• Rooms
• Parking
Shelf Life 12 months
Mixing Ratio 5 to 6lit. per 25kg
4 to 4.8lit. per 20kg
Coverage 3 to 7 kg/m²
Service temperature -20°C to +70°C
Additional information
| color | White |
|---|---|
| Brand | Weber |
| Product Category | Flooring Systems, Tile Adhesives |
| Size | 20kg |
Reviews
There are no reviews yet.