Weber Dry Flex – (A+B) 28kg
Elastic acrylic waterproof coating for crack bridging on walls and floors.
Dispatch within 24 Hours
Warranty Protection
Description
PRODUCT
Weberdry flex is a ready to use one component product, based on an elastomeric acrylic paste with co-polymer resins. It can be used on properly prepared surfaces such as concrete, masonry. It is mainly used to cover hairline cracks and visibly open cracks.
It is possible to over-coat existing coatings on a mineral or synthetic resin base that are well adhered and in good condition. Weberdry flex forms a protective and decorative film with permanent elasticity and excellent adhesion.
Weberdry flex shows an exceptional resistance to extreme weather conditions. It is non-toxic and environmental friendly
INSTRUCTIONS FOR USE SUBSTRATE PREPARATION
Substrate must be clean, sound and free from greasy matters and dust. Remove all traces of paint, mould oil which may affect the adhesion. Before the application the substrate must be sufficiently cured in a way that any shrinkage has already occurred. All imperfections, cracks must be repaired using suitable materials from our range of products before application of dry flex.
PRODUCT APPLICATION
Weberdry flex is applied using cotton roll or brush. It is usually required to apply two coats to obtain satisfactory results.
CONSUMPTION
7m2 / per 4 Kg pail / per coat.
STORAGE
6 months after manufacturing date in its original packing non open, protected form frost and heat
Additional information
| Brand | Weber |
|---|---|
| Product Category | Cementitious waterproofing, Waterproofing Systems |
Reviews
There are no reviews yet.